Вариант №4
ЗАДАНИЕ № 1 (- выберите один вариант ответа)
Заполните пропуск
Knife guards are designed to provide long life and high……… .
ВАРИАНТЫ ОТВЕТОВ:
| a) |
plugging |
b) |
level |
| c) |
jumping |
d) |
productivity |
ЗАДАНИЕ № 2 (- выберите один вариант ответа)
Заполните пропуск
The turning clutches and brakes have separate ……… .
ВАРИАНТЫ ОТВЕТОВ:
| a) |
damage |
b) |
cylinders |
| c) |
wheels |
d) |
controls |
ЗАДАНИЕ № 3 (- выберите один вариант ответа)
Заполните пропуск
The integral-mounted plow is ……… attachment.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
DVD |
b) |
tractor |
| c) |
sprayer |
d) |
hydraulic |
ЗАДАНИЕ № 4 (- выберите один вариант ответа)
Заполните пропуск
Each gang of disks has a strong ……… frame.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
rectangular |
b) |
digital |
| c) |
topping |
d) |
wooden |
ЗАДАНИЕ № 5 (- выберите один вариант ответа)
Заполните пропуск
It was …responsible of him to speak to reporters.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
ir- |
b) |
in- |
| c) |
un- |
d) |
non- |
ЗАДАНИЕ № 6 (- выберите один вариант ответа)
Заполните пропуск
Helen won’t remember the rules if she ……… to the teacher.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
to listen |
b) |
doesn't listen |
| c) |
haven't listened |
d) |
won't listen |
ЗАДАНИЕ № 7 (- выберите один вариант ответа)
Заполните пропуск
I would ……… you if I had my calculator.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
helping |
b) |
to help |
| c) |
helped |
d) |
ЗАДАНИЕ № 8 (- выберите один вариант ответа)
Заполните пропуск
I would rather ……… at home with my family today.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
stay |
b) |
to have been stayed |
| c) |
to stay |
d) |
to be staying |
ЗАДАНИЕ № 9 (- выберите один вариант ответа)
Заполните пропуск
Don’t forget this information must be checked before ……… .
ВАРИАНТЫ ОТВЕТОВ:
| a) |
publishing |
b) |
to publish |
| c) |
being published |
d) |
having published |
ЗАДАНИЕ № 10 (- выберите один вариант ответа)
Заполните пропуск
Several engineers visited one of the largest plants ……… tractors in our country.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
to produce |
b) |
produced |
| c) |
producing |
d) |
produce |
ЗАДАНИЕ № 11 (- выберите один вариант ответа)
Заполните пропуск
‘ABC Import’ is interested in the purchase of combines ……… by our plant.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
produced |
b) |
produce |
| c) |
producing |
d) |
to produce |
ЗАДАНИЕ № 12 (- выберите один вариант ответа)
Заполните пропуск
We saw them ……… down the street.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
to walk |
b) |
walking |
| c) |
walk |
d) |
walked |
ЗАДАНИЕ № 13 (- выберите один вариант ответа)
Заполните пропуск
The goods ……… to be delivered.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
was reported |
b) |
reported |
| c) |
were reported |
d) |
is reported |
ЗАДАНИЕ № 14 (- выберите один вариант ответа)
Заполните пропуск
……… the letter, Michael told us the latest news.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
Having received |
b) |
received |
| c) |
Have received |
d) |
receive |
ЗАДАНИЕ № 15 (- выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Passenger1: “Excuse me. Would you mind putting my case on the rack?”
Passenger2: “………”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
Of course you can. |
b) |
OK. Thank you very much. |
| c) |
Right … sorry. |
d) |
Not at all. There you are. |
ЗАДАНИЕ № 16 (- выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Boss: “Wendy, have you sent that telex to Paris??”
Secretary: “Oh, yes. ………”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
I’m ever so sorry. |
b) |
I did it yesterday. |
| c) |
I threw it away. |
d) |
I didn’t do it yesterday. |
ЗАДАНИЕ № 17 (- выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Teacher: “Technology is all around us and affects every aspect of our lives. Can you give some examples?”
Student: “………”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
They are transport, trade, infrastructure, power and so on. |
b) |
It affects every aspect of our lives. |
| c) |
It doesn’t matter. |
d) |
Excuse me. May I ask you something? |
ЗАДАНИЕ № 18 (- выберите один вариант ответа)
Выберите реплику, наиболее соответствующую ситуации общения
Boss: “Debby, you’ve misspelt the customer’s name. It should be Jacobson. ……… .”
Secretary: “I’m ever so sorry, sir.”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
If I hadn’t noticed it, we could have lost the order. |
b) |
What can I do for you? |
| c) |
Unfortunately I don’t remember. |
d) |
Thank you very much. |
ЗАДАНИЕ № 19 (- выберите один вариант ответа)
Заполните пропуск
Each autumn the ……… goes to Westminster for the State Opening of Parliament.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
beefeater |
b) |
president |
| c) |
monarch |
d) |
engineer |
ЗАДАНИЕ № 20 (- выберите один вариант ответа)
Заполните пропуск
The United States of America occupies the central part of ………
ВАРИАНТЫ ОТВЕТОВ:
| a) |
the South American continent |
b) |
the North American continent |
| c) |
Europe |
d) |
Asia |
ЗАДАНИЕ № 21 (- выберите один вариант ответа)
Заполните пропуск
……… is the most outstanding sight in Canada which attracts tourists from all over the world.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
Hollywood |
b) |
railway line |
| c) |
The Niagara Falls |
d) |
hospital |
ЗАДАНИЕ № 22 (- выберите один вариант ответа)
Заполните пропуск
James Watt was a Scottish ……… and mechanical engineer, known for his improvements of the steam engine.
ВАРИАНТЫ ОТВЕТОВ:
| a) |
president |
b) |
doctor |
| c) |
dentist |
d) |
inventor |
ЗАДАНИЕ № 23 (- выберите один вариант ответа)
Прочитайте текст и выполните задания
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
“Usually grain drills are equipped with rubber-tyred wheels.”
What are bagpipes?
a) В тексте нет информации
b) Истинным
с) Ложным
ЗАДАНИЕ № 24 (- выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Прочитайте текст и выберите один вариант ответа на вопрос:
“The frame is made of wood, well braced and reinforced at the corners.”
a) В тексте нет информации
b) Истинным
с) Ложным
ЗАДАНИЕ № 25 ( -выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Прочитайте текст и определите, является ли утверждение:
“The number of furrow openers and the distance they are spaced apart determine the size of a grain drill.”
a) В тексте нет информации
b) Истинным
с) Ложным
ЗАДАНИЕ № 26 (- выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Прочитайте текст и определите, является ли утверждение:
“Some mechanical spraying and dusting equipment is used to spread chemicals on crops and fields”
a) Истинным
b) Ложным
с) В тексте нет информации
ЗАДАНИЕ № 27 (- выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Укажите, какой части текста (1,2,3,4) соответствует следующая информация:
“The axle is carried beneath, with the wheels on each end of it.”
ВАРИАНТЫ ОТВЕТОВ:
ЗАДАНИЕ № 28 (- выберите один вариант ответа)
Scotland – A place to celebrate
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Укажите, какой части текста (1,2,3,4) соответствует следующая информация:
The fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer.
ВАРИАНТЫ ОТВЕТОВ:
ЗАДАНИЕ № 29 (- выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Ответьте на вопрос:
“What should be used on both the plain and fertilizer drills?”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
The fluted force feed and the roller bearings are used on both the plain and fertilizer drills. |
b) |
The fluted force feed and the double-run feed are used on both the plain and fertilizer drills. |
| c) |
The fluted force feed and the drive wheels are used on both the plain and fertilizer drills. |
d) |
The frame and the double-run feed are used on both the plain and fertilizer drills.
|
ЗАДАНИЕ № 30 (- выберите один вариант ответа)
Grain Drills
1. The grain drill is a machine designed and built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. The principal parts are the main frame, transport and drive wheels, a box for the seed, a device to feed the seed out of the hopper in uniform quantities, furrow openers to open the furrows for the seed, and covering devices. Grain drills can be classified as plain drills and fer¬tilizer drills. A plain drill has a hopper and feeds for the drilling of seeds only, while the fertilizer drill has a large seedbox which is divided lengthwise into two compartments, one for seed and one for fertilizer. Some drills are provided with grass-seed attachments. The fluted force feed and the double-run feed are used on both the plain and fertilizer drills.
2. The size of a grain drill is determined by the number of furrow openers and the distance they are spaced apart. The size is expressed as 12-6 or I8-7, which means there are 12 or I8 furrow openers spaced 6 or 7 in¬ches apart. Drills can be secured with the feeds and furrow openers spaced 6, 7 or 8 inches apart. A 27-7 drill will seed a strip 19 1/2 feet wide. The deep-furrow - type drill may have the furrow openers spaced 10, 12 and 14 in-ches apart. When grain drills are used to plant crops in rows spaced far enough apart to permit cultivation, some of the feeds must be covered.
3. The frame is usually made of angle steel, well braced and reinforced at the corners. It is necessary that the frame be strong enough to prevent sagging and to hold the parts in alignment, as all parts are connected to the frame. The axle is carried beneath, with the wheels on each end of it. The seedbox is carried above, while the furrow openers are suspended below. Roller bearings are usually used on each end of the axle.
4. Most grain drills are equipped with rubber-tyred wheels. These wheels are placed on the main axle of the drill. When smaller rubber-tyred wheels are used on this equipment, they are placed on a stub jack-shaft to elevate the drill to its regular height, so that the same draw-bars and pressure rods and springs can be used with either wheels. The implement type size for grain drills is usually 6.70 X 15.
Ответьте на вопрос:
“What is the grain drill designed to?”
ВАРИАНТЫ ОТВЕТОВ:
| a) |
It is built to place the seed of small grains and grasses in the ground in narrow-spaced rows at a uniform depth. |
b) |
It is designed to take the seed of small grains and grasses out of the ground in narrow-spaced rows at a uniform depth. |
| c) |
It is built to place vegetables in the ground in narrow-spaced rows at a uniform depth. |
d) |
It is designed to place vegetables out of the ground in narrow-spaced rows at a uniform depth. |
ЗАДАНИЕ № 31
Составьте рассказ из 10 – 15 предложений на тему «The university I study at (DSTU)».
|
|
